Transverse maxillary deficiency: treatment alternatives in face of early skeletal maturation

ABSTRACT Transverse deficiencies should be a priority in orthodontic treatment, and should be corrected as soon as diagnosed, to restore the correct transverse relationship between maxilla and mandible and, consequently, normal maxillary growth. Corrections may be performed at the skeletal level, by opening the midpalatal suture, or by dentoalveolar expansion. The choice of a treatment alternative depends on certain factors, such as age, sex, degree of maxillary hypoplasia and maturation of the midpalatal suture. Thus, the present study discusses different treatment approaches to correct maxillary hypoplasia in patients with advanced skeletal maturation.

RESUMO Os problemas transversais devem ser priorizados no tratamento ortodôntico e corrigidos assim que diagnosticados, para restituir a correta relação transversal entre maxila e mandíbula e, consequentemente, restabelecer o crescimento maxilar normal. A correção pode ser realizada em nível esquelético, por meio da abertura da sutura palatina mediana (SPM), ou por expansão dentoalveolar. A opção de tratamento depende de alguns fatores como idade, sexo, grau de hipoplasia da maxila e a maturação da SPM. Assim, o objetivo do presente trabalho foi discutir as diferentes abordagens terapêuticas para correção da hipoplasia maxilar em pacientes com maturação esquelética avançada.

Microbial species associated with dental caries found in saliva and in situ after use of self-ligating and conventional brackets

Abstract Objectives Enamel demineralization is among the main topics of interest in the orthodontic field. Self-ligating brackets have been regarded as advantageous in this aspect. The aim of this study was to evaluate the break homeostasis in the oral environment and the levels of microorganisms associated with dental caries among the different types of brackets. Material and Methods Twenty patients received two self-ligating brackets: In-Ovation®R, SmartClipTM, and one conventional GeminiTM. Saliva was collected before bonding (S0), 30 (S1) and 60 (S2) days after bonding. One sample of each bracket was removed at 30 and 60 days for the in situ analysis. Checkerboard DNA-DNA Hybridization was employed to evaluate the levels of microbial species as-sociated with dental caries. Data were evaluated by nonparametric Friedman and Wilcoxon tests at 5% significance level. Results The salivary levels of L. casei (p=0.033), S. sobrinus (p=0.011), and S. sanguinis (p=0.004) increased in S1. The in situ analyses showed alteration in S. mutans (p=0.047), whose highest levels were observed to the In-Ovation®R. Conclusions The orthodontic appliances break the salivary homeostasis of microorganisms involved in dental caries. The contamination pattern was different between self-ligating and conventional brackets. The In-Ovation®R presented worse performance considering the levels of cariogenic bacterial species.

Quantification of pro-inflammatory cytokines and osteoclastogenesis markers in successful and failed orthodontic mini-implants

Abstract Objectives: Miniscrew has been frequently used, considering that anchorage control is a critical point in orthodontic treatment, and its failure, the main adverse problem. Using two groups of stable (successful) and unstable (failed) mini-implants, this in vivo study aimed to quantify proinflammatory cytokines IL-1 α, IL-6, IL-17, and TNF-α and osteoclastogenesis marker RANK, RANKL, and OPG in gingival tissue, using the real-time polymerase chain reaction technique. Methodology: Thirteen patients of both sexes (11-49 years old) under orthodontic treatment were selected, obtaining 11 successful and 7 failed mini-implants. The mini-implants were placed and removed by the same surgeon, in both jaws. The mean time of permanence in the mouth was 29.4 months for successful and 7.6 months for failed mini-implants. At removal time, peri-mini-implant gingival tissue samples were collected and processed for quantification of the proinflammatory cytokines and osteoclastogenesis markers. Nonparametric Wilcoxon rank-sum test considering the clusters and Kruskal-Wallis test were used for statistical analysis (α=0.05). Results: No significant difference (p>0.05) was observed between the groups for either quantification of cytokines or osteoclastogenesis markers, except for IL-6 (p<0.05). Conclusions: It may be concluded that the expression of IL-1α, IL-17, TNF-α, RANK, RANKL, and OPG in peri-implant gingival tissue were not determinant for mini-implant stability loss, but the higher IL-6 expression could be associated with mini-implant failure.

Successful and failed mini-implants: microbiological evaluation and quantification of bacterial endotoxin

Abstract Objectives Using two groups of mini-implants (successful and failed) the objectives of this in vivo study were: to evaluate the microbial contamination by the checkerboard DNA-DNA hybridization technique and to quantify the bacterial endotoxin by the limulus amebocyte lysate assay. Material and Methods The 15 successful and 10 failed mini-implants (1.6 mm diameter × 7.0 or 9.0 mm long), placed in the maxilla and/or mandible, were obtained from 15 patients undergoing orthodontic treatment. Data were analyzed statistically by the Wilcoxon rank-sum test using the SAS software (a=0.05). Results All 40 microbial species were detected in both groups of mini-implants, with different frequencies. No differences were observed between the groups with respect to microbial complexes (blue, purple, yellow, green, orange, red and other species) and endotoxin quantification (p>0.05). Conclusion Neither microbial contamination nor endotoxin quantification was determinant for the early loss of stability of the mini-implants.

Influence of resin-modified glass ionomer and topical fluoride on levels of Streptococcus mutans in saliva and biofilm adjacent to metallic brackets

Abstract Decalcification of enamel during fixed orthodontic appliance treatment remains a problem. White spot lesions are observed in nearly 50% of patients undergoing orthodontic treatment. The use of fluoride-containing orthodontic materials has shown inconclusive results on their ability to reduce decalcification. The aims of this investigation were to compare the levels of Streptococcus mutans (SM) in saliva and biofilm adjacent to orthodontic brackets retained with a resin-modified glass ionomer cement (RMGIC) (Fuji ORTHO LC) and a light cured composite resin (Transbond XT), and to analyze the influence of topical application of the 1.23% acidulated phosphate fluoride (APF) on SM counts. In a parallel study design, two groups (n=14/15) were used with random allocation and high salivary SM counts before treatment. Biofilm was collected from areas adjacent to the brackets on teeth 13, 22, 33, and 41. Both saliva and biofilm were collected on the 7th, 21st, 35th, and 49th days after appliance placement. Topical fluoride application was carried out on the 35th day. Bonding with RMGIC did not alter SM counts in saliva or biofilm adjacent to the brackets. On the other hand, the biofilm adjacent to brackets retained with composite resin showed a significant increase in SM counts along the trial period. Topical application of 1.23% APF did not reduce salivary or biofilm SM counts regardless of the bonding material. In conclusion, fluoride topical application did not show efficacy in reducing SM. The use of RMGIC as bonding materials allowed a better control of SM cfu counts in dental biofilm hindering the significant increase of these microorganisms along the trial period, which was observed in the biofilm adjacent to the composite material.

Corrosion in Haas expanders with and without use of an antimicrobial agent: an in situ study

OBJECTIVES: The purpose of this study was to evaluate in situ the occurrence of corrosion in the soldering point areas between the wire, silver brazing and band in Haas expanders. MATERIAL AND METHODS: Thirty-four 7-12-year-old patients who needed maxillary expansion with a Haas expander were randomly assigned to two groups of 17 individuals each, according to the oral hygiene protocol adopted during the orthodontic treatment: Group I (control), toothbrushing with a fluoride dentifrice and Group II (experimental), toothbrushing with the same dentifrice plus 0.12 percent chlorhexidine gluconate (Periogard®) mouthrinses twice a week. The appliances were removed after approximately 4 months. Fragments of the appliances containing a metallic band with a soldered wire were sectioned at random for examination by stereomicroscopy, scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS). Data were analyzed statistically by Fisher's test at 5 percent significance level. RESULTS: The analysis by optical microscopy revealed areas with color change suggestive of corrosion in the soldering point areas joining the band and the wire in all specimens of both groups, with no statistically significant difference between the groups (p=1). The peaks of chemical elements (Ni, Fe, Cr, O, C and P) revealed by EDS were also similar in both groups. CONCLUSION: Color changes and peaks of chemical elements suggestive of corrosion were observed in the soldering point areas between the wire, silver brazing and band in both control and experimental groups, which indicate that the 0.12 percent chlorhexidine gluconate mouthrinses did not influence the occurrence of corrosion in situ.

Orthodontic-surgical treatment of class III malocclusion with mandibular asymmetry

Class III skeletal malocclusion may present several etiologies, among which maxillary deficiency is the most frequent. Bone discrepancy may have an unfavorable impact on esthetics, which is frequently aggravated by the presence of accentuated facial asymmetries. This type of malocclusion is usually treated with association of Orthodontics and orthognathic surgery for correction of occlusion and facial esthetics. This report presents the treatment of a patient aged 15 years and 1 month with Class III skeletal malocclusion, having narrow maxilla, posterior open bite on the left side, anterior crossbite and unilateral posterior crossbite, accentuated negative dentoalveolar discrepancy in the maxillary arch, and maxillary and mandibular midline shift. Clinical examination also revealed maxillary hypoplasia, increased lower one third of the face, concave bone and facial profiles and facial asymmetry with mandibular deviation to the left side. The treatment was performed in three phases: presurgical orthodontic preparation, orthognathic surgery and orthodontic finishing. In reviewing the patient's final records, the major goals set at the beginning of treatment were successfully achieved, providing the patient with adequate masticatory function and pleasant facial esthetics.

A maloclusão esquelética de Classe III pode apresentar diversas etiologias, sendo a deficiência maxilar a mais frequente. Discrepâncias esqueléticas podem ter impacto estético desfavorável, muitas vezes agravadas pela presença de assimetrias faciais acentuadas. Este tipo de maloclusão é geralmente tratado com a associação de Ortodontia e cirurgia ortognática para a correção da oclusão e da estética facial. Este relato de caso apresenta o tratamento de um paciente com 15 anos e 1 mês de idade, com maloclusão esquelética de Classe III, atresia maxilar, mordida aberta posterior do lado esquerdo, mordida cruzada anterior e mordida cruzada posterior unilateral, acentuada discrepância dento-alveolar negativa acentuada no arco maxilar e desvios das linhas médias superior e inferior. Ao exame clínico o paciente também apresentava deficiência maxilar, aumento do terço inferior da face, perfil ósseo e facial côncavos e assimetria facial, com desvio da mandíbula para o lado esquerdo. O tratamento foi realizado em três fases: preparo ortodôntico pré-cirúrgico, cirurgia ortognática e finalização ortodôntica. Analisando os registros finais do paciente, os principais objetivos estabelecidos ao início do tratamento foram alcançados com sucesso, promovendo ao paciente adequada função mastigatória e estética facial agradável.

Considerações sobre a etiologia da classe II subdivisão / Considerations about the etiology of the class II subdivision malocclusion

É um desafio o tratamento ortodôntico da Classe Il subdivisão devido à relação oclusal assimétrica (Classe II de um lado da arcada dentária e Classe I do outro) e a dificuldade em diagnosticar seus fatores etiológicos. Com o objetivo de facilitar ao ortodontista o tratamento da Classe II subdivisão foi realizada uma pesquisa sobre a etiologia desta má-oclusão. Foram pesquisados vários bancos de dados eletrônicos (Pubmed, Medline, Biblioteca Cochrane, Scopus) e realizadas pesquisas secundárias. Osdados coletados demonstraram que nesta má-oclusão existe uma predominância de alterações dentoalveolares que envolvemprincipalmente o arco inferior, com o molar inferior posicionado mais posterior no lado da Classe II e um desvio de linha média dentária inferior para o lado da Classe II.Secundariamente existe uma assimetria no arco superior, com molar mais mesializado no lado da Classe II e um desvio de linha média dentária para o lado da Classe I. Portanto, a Classe II subdivisão tem uma etiologia primordialmente dentoalveolar inferior, secundariamente dentoalveolar superior e casualmente esquelética. Quandopresente, a alteração esquelética é suave e compromete principalmente a mandíbula.

The orthodontic treatment of the Class II subdivision malocclusion is challenging due to the asymmetrical occlusal relationship (Class II on one side of the dental arch and Class I on the other side) and to the complexity in the diagnosis of its etiological factors. The objective of the actual study was to bring information that facilitates the orthodontist to accomplish the Class II subdivisionmalocclusion treatment. Electronic data sources available were examined (Pubmed, Medline, Cochrane Library, Scopus) as well as secondary sources searched. The data collected indicate that in this malocclusion there is a predominance of dentoalveolaralterations which involve mainly the mandibular arch with the mandibular molar positioned more posterior on the side of the Class II and a shift of the mandibular dental medline towards the side of the Class II. Secondary there was an. asymmetry in the maxillaryarch, with greater mesial migration of the maxillary molar on the side of the Class II and a dental midline shift towards the side of the Class I. Therefore, the etiology of the Class II subdivision malocclusion is primarily dentoaveolar mandibular; secondarilydentoalveolar maxillary and occasionally skeletal. When the skeletal asymmetry is present, it is slight and it mainly compromises the mandible.

Adaptações musculares após tratamento com aparelhos funcionais / Muscular adaptations after functional appliance therapy

A má-oclusão de Classe II é um dos problemas ortodônticos mais frequentes e a retrusão mandibular é a causa mais comum deste tipo de má-oclusão. Um tratamento capaz de estimular o crescimento mandibular é indicado para estes pacientes. Os aparelhosortopédicos funcionais são utilizados com o objetivo de corrigir as alterações morfológicas dos ossos maxilares e dos dentes e adequar à função muscular da face neste tipo de má-oclusão. Entretanto, ainda existem muitas controvérsias a este respeito,como qual o melhor período para o início do tratamento, o modo de ação e as alterações musculares ocorridas. O objetivo deste trabalho foi realizar uma revisão bibliográfica em relação às alterações musculares induzidas por aparelhos funcionais de protrusãomandibular, uma vez que tem sido de grande interesse avaliar as mudanças na atividade da musculatura orofacial durante a terapia com aparelhos funcionais para determinar como estes aparelhos funcionam em termos de adaptação muscular.

Class II malocclusion is one of the most common orthodontic problems. The most consistent diagnostic finding in Class II malocclusion is mandibular skelelal retrusion. lt is well recognized that mandibular growth can be influenced favorably with a variety of functional appliances. This treatment response is considered to be the result of both skeletal and neuromuscular adaptations. Therefore, there is still much controversy regarding the changes of muscular activity produced by functional appliances. The aim of this review of lhe literature was to assess muscular alterations induced by functional appliances once it has been of great interest to investigate changes in lhe orofacial muscle activity during functional jaw orthopedic treatment to determine how such so-called "growth guidance" appliances work in terms of the adaptation of muscle function.

Comparison of two cleansing pastes for the removal of biofilm from dentures and palatal lesions in patients with atrophic chronic candidiasis

Foram comparadas duas pastas, específica para prótese total e convencional para dentes naturais, quanto à habilidade de remoção de biofilme e cura de lesões do palato em pacientes com Candidíase Atrófica Crônica. Avaliou-se também o grau de correlação entre biofilme e grau de eritema. Vinte e quatro pacientes (45-80 anos) foram distribuídos em: a) pasta específica (produto experimental); b) pasta convencional (pasta dental Sorriso). Para ambos os grupos foram fornecidas escovas dentais de cerdas macias. Assuperfícies internas (próteses superiores) foram evidenciadas (fluoresceína 1%) e fotografadas (45º) em 4 visitas (0, 15, 30 e 60 dias). Os slides foram escaneados e as áreas (total e biofilme) foram medidas (software Image Tool). Sobre slides avaliou-se o grau de eritema empregando-se o Índice Tecidual de Prótese. Houve redução significativa (1%) dos níveis de biofilme (análise de variância) entre as primeiras (0 e 15 dias) e últimas visitas (45 e 60 dias) e dos escores de eritema (Kruskal—Wallis) da primeira para quarta vistita para ambas pastas. O teste de Mann-Whitney mostrou diferença estatística entre as pastas para os níveis de biofilme e igualdade estatística para os escores de eritema. Os valores de correlação entre níveis de biofilme e grau de eritema foram de 0,3801 (pasta específica) e 0,3678 (pasta convencional). A pasta específica mostrou-se efetiva, mostrando que é possível a manutenção da higiene de próteses totais com o uso regular de higienizador em forma de pasta.